欢迎访问《人工晶体学报》官方网站,今天是 分享到:

人工晶体学报 ›› 2009, Vol. 38 ›› Issue (6): 1380-1383.

• • 上一篇    下一篇

交替溅射法制备BaM铁氧体薄膜的特性研究

张弘;刘曦;刘小晰;魏福林;A.S.Kamzin;贺德衍   

  1. 兰州大学物理科学与技术学院,兰州,730000;日本国立信州大学工学部情报工学科,长野,380-8553;俄罗斯约飞物理技术研究所,圣彼得堡,194121
  • 出版日期:2009-12-15 发布日期:2021-01-20
  • 基金资助:
    国家自然科学基金(10174018);俄罗斯基础研究基金(00-20-77889)

Research on BaM Ferrite Films Synthesized by Alternate Sputtering Method

ZHANG Hong;LIU Xi;LIU Xiao-xi;WEI Fu-lin;A.S.Kamzin;HE De-yan   

  • Online:2009-12-15 Published:2021-01-20

摘要: 以双靶射频溅射和交替沉积的方法制备了不同化学组成的BaM铁氧体薄膜.对所沉积的薄膜进行了两种不同方式的热处理.通过热处理后铁氧体薄膜的X射线衍射(XRD), 逆转换电子穆斯堡尔谱(CEMS)及原子力显微镜(AFM)等微观结构的分析和宏观磁性的测试,结果表明两步骤退火过程对于垂直取向结构的形成是有利的.

关键词: 钡铁氧体薄膜;垂直各向异性;穆斯堡尔谱

Abstract: The BaM ferrite films with fine grain size as small as 30 nm were prepared by reactive RF diode sputtering method, using alternate depositing process. It is found that two step annealing process is beneficial for films to form perpendicular orientation structures, which were identified by microstructure measurement such as X-ray diffraction pattern (XRD), conversion electron Mssbauer spectra (CEMS) and atomic force microscope(AFM).

Key words: The BaM ferrite films with fine grain size as small as 30 nm were prepared by reactive RF diode sputtering method, using alternate depositing process. It is found that two step annealing process is beneficial for films to form perpendicular orientation structures, which were identified by microstructure measurement such as X-ray diffraction pattern (XRD), conversion electron Mssbauer spectra (CEMS) and atomic force microscope(AFM).

中图分类号: