欢迎访问《人工晶体学报》官方网站,今天是 2025年7月18日 星期五 分享到:

人工晶体学报 ›› 2017, Vol. 46 ›› Issue (9): 1851-1857.

• • 上一篇    下一篇

离子液体改性白炭黑及性能表征

王兵辉;熊玉竹;吴胜学;江猛;王倩;张清坡   

  1. 贵州大学材料与冶金学院,贵阳,550025;贵州大学材料与冶金学院,贵阳 550025;贵州大学,贵州省橡胶复合材料工程实验室,贵阳 550025
  • 出版日期:2017-09-15 发布日期:2021-01-20
  • 基金资助:
    国家自然科学基金(51663003);贵州大学研究生教育创新基地(CXJD[2014]008)

Property Characterization of Ionic Liquid Modifying Silica

WANG Bing-hui;XIONG Yu-zhu;WU Sheng-xue;JIANG Meng;WANG Qian;ZHANG Qing-po   

  • Online:2017-09-15 Published:2021-01-20

摘要: 采用离子液体1-烯丙基-3-甲基氯化咪唑(AMI)改性白炭黑(SiO2).通过傅里叶红外光谱(FT-IR),X射线衍射(XRD),X射线光电子能谱(XPS),热失重分析仪(TGA),扫描电镜(SEM),接触角仪,BET比表面积和孔径分析仪,对改性前后白炭黑的微观结构以及性能进行表征.结果表明,经AMI改性后,白炭黑粒子间的相互作用明显减小,团聚倾向减弱,在橡胶复合材料基体中的分散性提高.AMI改性白炭黑疏水性增强,接触角由12.7°增加到80.5°,比表面积由67.84cm2/g增加到124.28cm2/g.改性前后,白炭黑晶型结构变化不大,仍为无定形态.

关键词: 离子液体;白炭黑;微观结构;分散性;疏水性

Abstract: Ionic liquid 1-allgl-3-methylimidazolium chloride ( AMI ) was employed to modify silica .The microstructure and property of silica of modification before and after were characterized with Fourier transform infrared spectroscopy ( FT-IR ) , X-ray diffraction ( XRD ) , X-ray photoelectron spectroscopy ( XPS ) , Thermal gravimetric analysis ( TGA ) , Scanning electron microscope ( SEM ) , contact goniometer, BET specific surface area and pore diameter analysis .The result shows that , through AMI modification, interaction of silica particle decrease obviously , agglomeration between the particles weak , dispersion property improve evidently in rubber composite matrix , hydrophobic property of modified silica enhance, the range of contact angle increase from 12.7°to 80.5°.Specific surface area aggrandize from 67.84 cm2/g to 124.28 cm2/g.Modification before and after, the crytalline structure of silica change little, yet amorphous structure .

Key words: Ionic liquid 1-allgl-3-methylimidazolium chloride ( AMI ) was employed to modify silica .The microstructure and property of silica of modification before and after were characterized with Fourier transform infrared spectroscopy ( FT-IR ) , X-ray diffraction ( XRD ) , X-ray photoelectron spectroscopy ( XPS ) , Thermal gravimetric analysis ( TGA ) , Scanning electron microscope ( SEM ) , contact goniometer, BET specific surface area and pore diameter analysis .The result shows that , through AMI modification, interaction of silica particle decrease obviously , agglomeration between the particles weak , dispersion property improve evidently in rubber composite matrix , hydrophobic property of modified silica enhance, the range of contact angle increase from 12.7°to 80.5°.Specific surface area aggrandize from 67.84 cm2/g to 124.28 cm2/g.Modification before and after, the crytalline structure of silica change little, yet amorphous structure .

中图分类号: