非等厚电极对石英晶体板高频振动影响分析

人工晶体学报 ›› 2020, Vol. 49 ›› Issue (12): 2256-2260.

非等厚电极对石英晶体板高频振动影响分析

吴荣兴^1,2, 王晓明¹

1.宁波职业技术学院应用力学研究所,宁波 315800;
2.宁波大学机械与力学学院,宁波 315211

出版日期:2020-12-15 发布日期:2021-01-25
作者简介:吴荣兴(1982—),男,浙江省人,博士,副教授。E-mail:wurongxing98@163.com
基金资助:
国家自然科学基金(11272161);浙江省教育厅高校科研项目(Y201636501)

Influence of Unequal Thickness Electrode on High Frequency Vibrations of Quartz Crystal Plate

WU Rongxing^1,2, WANG Xiaoming¹

1. Institute of Applied Mechanics, Ningbo Polytechnic, Ningbo 315800, China;
2. School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China

Online:2020-12-15 Published:2021-01-25

摘要/Abstract

摘要： 利用Mindlin一阶板理论分析了覆盖非等厚电极层的AT切石英晶体板的高频振动,获得了包含厚度剪切振动模态、弯曲振动模态、面剪切振动模态、拉伸振动模态和厚度扭转振动模态的色散关系和频谱关系。研究结果表明由于上下电极层的非等厚性,过去认为不耦合的两组振动模态变得相互耦合,必须进行联合求解。计算结果表明由于非等厚电极层的质量效应,各振动模态的频率均有所降低。根据石英晶体板高频振动的频谱关系图,可以选取石英晶体板的最佳长厚比作为谐振器的制造尺寸。获得的电极层厚度与频率变化关系可以用来指导谐振器电极层厚度设计。

关键词: 石英晶体板, 频率, 谐振器, 电极, 非等厚度

Abstract: Based on Mindlin's first-order plate theory, the high-frequency vibrations of AT cut quartz crystal plate covered with unequal thickness electrode layers was analyzed. The dispersion relation and frequency spectrum of vibration modes including thickness-shear vibration mode, flexural vibration mode, face-shear vibration mode, extension mode and thickness-twist modes were obtained. The research results show that due to unequal thickness of the upper and lower electrode layers, the two originally groups of vibration modes that were previously considered uncoupled are now coupled and must be solved jointly. The computing results show that the frequency of every vibration mode decrease due to the mass effect of the unequal thickness electrode layer. According to the frequency spectrum of high frequency vibration of quartz crystal plate, the optimal length/thickness ratio of quartz crystal plate can be selected as the manufacturing size of resonator. The relationship between the thickness of the electrode layer and the frequency variation can be used to guide the design of the electrode layer thickness of the resonator.

Key words: quartz crystal plate, frequency, resonator, electrode, unequal thickness

中图分类号:

TN751.2

吴荣兴, 王晓明. 非等厚电极对石英晶体板高频振动影响分析[J]. 人工晶体学报, 2020, 49(12): 2256-2260.

WU Rongxing, WANG Xiaoming. Influence of Unequal Thickness Electrode on High Frequency Vibrations of Quartz Crystal Plate[J]. JOURNAL OF SYNTHETIC CRYSTALS, 2020, 49(12): 2256-2260.

参考文献

[1] 陈福彬,田文杰,高锦春.基于能陷理论的石英力敏谐振器集群的设计[J].压电与声光,2019,41(3):349-352.
[2] 任宗金,刘帅,张军,等.三向力作用下石英晶块应力分布及力传感研究[J].压电与声光,2019,41(5):661-665.
[3] Wu R X, Wang W J, Chen G J, et al. Free and forced vibrations of SC-cut quartz crystal rectangular plates with the first-order Mindlin plate equations[J]. Ultrasonics, 2017, 73: 96-106.
[4] Huang Q, Wu R X, Xie L T, et al. Examinations of vibration frequency and mode shape variations of quartz crystal plates in a thermal field with strain and kinetic energies[J]. Journal of Thermal Stresses, 2020, 43(4): 456-472.
[5] Mindlin R D. An introduction to the mathematical theory of vibrations of elastic plates[M]. New Jersey: World Scientific, 2006.
[6] Wang J, Yang J S. Higher-order theories of piezoelectric plates and applications[J]. Applied Mechanics Reviews, 2000, 53(4): 87-99.
[7] Wu R X, Zhang W L, MA T F, et al. Thickness-shear frequencies of an infinite quartz plate with graded material properties across the thickness[J]. Acta Mechanica Solida Sinica, 2020, 33(3): 361-367.
[8] Shi J J, Fan C Y, Zhao M H, et al. Thickness-shear vibration characteristics of an AT-cut quartz resonator with rectangular ring electrodes[J]. International Journal of Applied Mechanics, 2016, 51(1): 1-10.
[9] Wang J, Zhao W H. The determination of the optimal length of crystal blanks in quartz crystal resonators[J]. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2005, 52(11): 2023-2030.
[10] Xu L M, Geng Y L, Hu Y T, et al. Thickness-shear vibration of an AT-cut quartz plate with elliptical electrodes and implications in optimal blank geometry[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2019, 56(4): 875-879.
[11] 韩伟.小尺寸石英晶体谐振器的质量改善研究——以P公司FW16M产品为例[D].济南:山东大学,2016.
[12] Wang, J N, Hu Y T, Yang J S. Frequency spectra of AT-cut quartz plates with electrodes of unequal thickness[J]. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2005, 57(5): 1146-1151.
[13] 吴荣兴,于兰珍,李晓东,等.电场作用下石英晶体板非线性高频振动分析[J].应用力学学报,2019,36(5):1123-1130.
[14] 赵文华.考虑材料耗散的石英晶体谐振器电路参数的计算[D].宁波:宁波大学,2004.
[15] Wang J, Yu J D, Yong Y K. On the correction of the higher-order Mindlin plate theory[J]. International Journal of Applied Electromagnetics and Mechanics, 2005, 22(1-2): 83-96.
[16] Wang J, Shen L J, Yang J S. Effects of electrodes with continuously varying thickness on energy trapping in thickness-shear mode quartz resonators[J]. Ultrasonics, 2018, 48(2): 150-154.
[17] 李晓东,吴荣兴,于兰珍,等.考虑材料系数修正的石英晶体谐振器研究[J].固体电子学研究与进展,2018,38(6):451-455.