基于聚合反应制备的钛离子掺杂LiFePO4/C复合材料

人工晶体学报 ›› 2017, Vol. 46 ›› Issue (8): 1614-1618.

基于聚合反应制备的钛离子掺杂LiFePO4/C复合材料

李玲芳;曾武军;刘万峰

湖南文理学院机械工程学院,常德,415000

出版日期:2017-08-15 发布日期:2021-01-20
基金资助:
湖南文理学院博士科研启动项目;湖南文理学院"洞庭湖生态经济区建设与发展"湖南省协同创新中心(湘教通[2015]351号)

Synthesis of Ti Ion Doped LiFePO4/C Composite Material Based on Polymerization Reaction

LI Ling-fang;ZENG Wu-jun;LIU Wan-feng

Online:2017-08-15 Published:2021-01-20

摘要/Abstract

摘要： 首先基于聚合反应合成FePO4/PANI前驱体,再以为LiOH·H2O,FePO4/PANI 和 PVA原料制备了LiFePO4正极材料,此外再对其进行碳包覆以及Ti4+掺杂,三种试样分别标记为LiFePO4,LiFePO4/C及LiFe0.96Ti0.02PO4/C.通过XRD、EDS及充放电测试等手段表征了材料的微观结构与电化学性能.实验结果证明:试样的XRD图谱均与标准LiFePO4图谱一致,不存在无定形碳衍射峰.与未掺杂试样LiFePO4/C相比,LiFe0.96Ti0.02PO4/C的电子电导率与其相近,但离子扩散系数有所改善,Ti4+在晶格中均匀分布,因此与其他两试样相比,其电化学性能更好.试样在C/10、C/2、1C、3C及5C倍率下的放电比容量为158.7 mAh·g-1、153.3 mAh·g-1、147.6 mAh·g-1、136.4 mAh·g-1及123.5 mAh·g-1,具有良好的倍率性能与电位稳定性.

关键词: 锂离子电池;LiFe0.96Ti0.02PO4/C复合材料;聚合反应;碳包覆;掺杂

Abstract: Firstly, the precursor powder FePO4/PANI was synthesized by polymerization reaction.Then, the cathode material LiFePO4 was synthesized by using LiOH·H2O, FePO4/PANI and PVA as the raw materials.In addition the carbon-coated and Ti4+-doped material were synthesized simultaneously.These three samples were marked as LiFePO4, LiFePO4/C and LiFe0.96Ti0.02PO4/C.Their respective microstructure and characteristics were investigated via XRD, EDS and charge-discharge tests.The XRD patterns agree well with the standard LiFePO4 pattern and without amorphous carbon.Comparing with sample LiFePO4/C, LiFe0.96Ti0.02PO4/C has approximate electronic conductivity and higher Li+ diffusion coefficient.Ti4+ distributes in the lattice evenly.Thus, LiFe0.96Ti0.02PO4/C has better electrochemical performances than the other samples.It's initial discharge capacities are 158.7 mAh·g-1,153.3 mAh·g-1,147.6 mAh·g-1,136.4 mAh·g-1 and 123.5 mAh·g-1 at C/10、C/2、1C、3C and 5C rate respectively.The rate performance and potential stability of LiFe0.96Ti0.02PO4/C are favorable.

Key words: Firstly, the precursor powder FePO4/PANI was synthesized by polymerization reaction.Then, the cathode material LiFePO4 was synthesized by using LiOH·H2O, FePO4/PANI and PVA as the raw materials.In addition the carbon-coated and Ti4+-doped material were synthesized simultaneously.These three samples were marked as LiFePO4, LiFePO4/C and LiFe0.96Ti0.02PO4/C.Their respective microstructure and characteristics were investigated via XRD, EDS and charge-discharge tests.The XRD patterns agree well with the standard LiFePO4 pattern and without amorphous carbon.Comparing with sample LiFePO4/C, LiFe0.96Ti0.02PO4/C has approximate electronic conductivity and higher Li+ diffusion coefficient.Ti4+ distributes in the lattice evenly.Thus, LiFe0.96Ti0.02PO4/C has better electrochemical performances than the other samples.It's initial discharge capacities are 158.7 mAh·g-1,153.3 mAh·g-1,147.6 mAh·g-1,136.4 mAh·g-1 and 123.5 mAh·g-1 at C/10、C/2、1C、3C and 5C rate respectively.The rate performance and potential stability of LiFe0.96Ti0.02PO4/C are favorable.

中图分类号:

TQ152

李玲芳;曾武军;刘万峰. 基于聚合反应制备的钛离子掺杂LiFePO4/C复合材料[J]. 人工晶体学报, 2017, 46(8): 1614-1618.

LI Ling-fang;ZENG Wu-jun;LIU Wan-feng. Synthesis of Ti Ion Doped LiFePO4/C Composite Material Based on Polymerization Reaction[J]. JOURNAL OF SYNTHETIC CRYSTALS, 2017, 46(8): 1614-1618.

[1]	吴旭;唐晓宁. 硫/碳复合材料在锂硫电池正极中的应用[J]. 人工晶体学报, 2020, 49(9): 1752-1763.
[2]	张英杰;王朕;吴刚;董鹏;曾晓苑;李雪. 基于生物质衍生自支撑阴极的锂二氧化碳电池[J]. 人工晶体学报, 2020, 49(4): 646-650.
[3]	刘文文;朱鹏程;向康宁;黄杰;姚丹. α-Ni(OH)2三维花状纳米结构构建及其电化学性能研究[J]. 人工晶体学报, 2019, 48(7): 1320-1325.
[4]	姜华伟;刘亚飞;陈彦彬;岳鹏;朱素冰. 锂离子电池三元正极材料研究及应用进展[J]. 人工晶体学报, 2018, 47(10): 2205-2211.
[5]	肖东丽;周康;童君. 铜锌锡硫正极全固态薄膜锂离子电池的研究[J]. 人工晶体学报, 2017, 46(11): 2143-2146.
[6]	赫文秀;张永强;蒋文全;张文广. 覆钴型氢氧化镍的电化学性能研究[J]. 人工晶体学报, 2012, 41(5): 1425-1429.