人工晶体学报 ›› 2017, Vol. 46 ›› Issue (12): 2352-2355.
刘聪;郭伟明;赵哲;伍尚华
LIU Cong;GUO Wei-ming;ZHAO Zhe;WU Shang-hua
摘要: 以α-Si3N4粉为原料,通过添加不同含量的Y2O3-Al2O3烧结助剂(6wt;、8wt;和10wt;),在1800℃下采用热压烧结制备了Si3 N4陶瓷,研究了Y2 O3-Al2 O3含量对Si3 N4陶瓷的物相、致密度、显微结构与力学性能的影响,结果表明:添加6wt;的Y2 O3-Al2 O3助剂即可获得高致密的Si3 N4陶瓷,继续增加助剂含量对Si3 N4陶瓷的致密度影响不大,但是显著影响 α-Si3 N4相和β-Si3 N4相的含量,较高的Y2 O3-Al2 O3助剂含量有利于α-Si3 N4转化为β-Si3 N4.不依赖于Y2 O3-Al2 O3助剂含量,Si3 N4陶瓷均包含细小的等轴晶粒和大尺寸的棒状晶粒,呈现双峰结构,但是Y2 O3-Al2 O3助剂含量增加到10wt;时,可以显著增加棒状晶粒的数量,形成更显著的双峰结构.基于当前研究,发现加入低含量的Y2O3-Al2O3助剂(6wt;),可以获得高硬度高强度的Si3N4陶瓷,而引入高含量的Y2O3-Al2O3助剂(10wt;),则可以获得高韧性高强度的Si3N4陶瓷.
中图分类号: