具有碳化硅纳米线编织结构的氧化铝泡沫陶瓷的制备及性能研究

摘要/Abstract

摘要： 本文利用简单、高效的浆料直接发泡法制备气孔率高达96%的Al₂O₃/Si泡沫陶瓷,并选用简便、易行的焦炭埋烧工艺在Al₂O₃/Si泡沫陶瓷坯体中生长出大量SiC纳米线。通过控制烧结温度来观察分析SiC纳米线的生长形貌变化。采用扫描电子显微镜(SEM)、X射线衍射仪、BET比表面积测试仪、电子万能试验机等对泡沫陶瓷的微观结构、物相组成、比表面积、气孔率、抗压强度、热导率进行分析与表征。结果表明,1 450 ℃烧结时得到的SiC纳米线最多,纳米线在泡沫陶瓷孔壁交织缠绕。同时观察到SiC纳米线的存在改变了氧化铝泡沫陶瓷固有的脆性断裂模式,SiC纳米线可有效促进泡沫陶瓷在压缩过程中的裂纹偏转。本实验制备了一种新型的纳米线缠绕在孔壁上的三维网络结构的泡沫陶瓷,为在泡沫陶瓷内部原位生长SiC纳米线提供了新的方法,更好地拓展了泡沫陶瓷在环境过滤、催化剂载体等领域中的应用。

关键词: 氧化铝泡沫陶瓷, SiC纳米线, 埋烧, 直接发泡法, 烧结温度, 纳米线原位生长, 三维网络结构

Abstract: In this paper, Al₂O₃/Si foam ceramics with porosity up to 96% were prepared by simple and efficient slurry foaming method, and a large number of SiC nanowires were obtained in Al₂O₃/Si foam ceramics body by simple and convenient burying sintering process of coke. The growth morophology of SiC nanowires were observed and analyzed by controlling sintering temperature. The microstructure, phase composition, specific surface area, porosity, compressive strength and thermal conductivity of foam ceramics were analyzed and characterized by scanning electron microscope (SEM), X-ray diffractometer, BET specific surface area tester and electronic universal testing machine. The results show that the most SiC nanowires are obtained when sintered at 1 450 ℃. It is also observed that the presence of SiC nanowires change the inherent brittle fracture mode of alumina foam ceramics, and SiC nanowires can effectively promote its crack deflection during compression. In this study, a novel foam ceramics were prepared with three-dimensional network structure of nanowires wound on the hole wall, which provides a new method for in-situ growth of SiC nanowires inside the foam ceramics, and the application of foam ceramics in environmental filtration and catalyst carrier is expanded.

Key words: alumina foam ceramics, SiC nanowire, burying sintering, direct foaming method, sintering temperature, in-situ growth of nanowire, three-dimensional network structure

中图分类号:

TQ174

兰凤仪, 杨名昊, 兰天, 张由飞, 李泳娇, 夏尊, 王修慧, 杨金龙. 具有碳化硅纳米线编织结构的氧化铝泡沫陶瓷的制备及性能研究[J]. 人工晶体学报, 2022, 51(7): 1275-1283.

LAN Fengyi, YANG Minghao, LAN Tian, ZHANG Youfei, LI Yongjiao, XIA Zun, WANG Xiuhui, YANG Jinglong. Synthesis and Properties of Alumina Foam Ceramics with SiC Nanowires Braided Structure[J]. JOURNAL OF SYNTHETIC CRYSTALS, 2022, 51(7): 1275-1283.

参考文献

[1] CARTY W M, LEDNOR P W. Monolithic ceramics and heterogeneous catalysts: honeycombs and foams[J]. Current Opinion in Solid State and Materials Science, 1996, 1(1): 88-95.
[2] 柴宇新.蛋白发泡工艺制备泡沫陶瓷及其性能研究[D].哈尔滨:哈尔滨工业大学,2013.
CHAI Y X. Ceramic foam prepared by protein foaming method and its performance[D]. Harbin: Harbin Institute of Technology, 2013(in Chinese).
[3] GATICA J M, VIDAL H. Non-cordierite clay-based structured materials for environmental applications[J]. Journal of Hazardous Materials, 2010, 181(1/2/3): 9-18.
[4] 赵瑾,毛小建,王士维.直接发泡法制备孔特性可控的氧化铝泡沫陶瓷[J].硅酸盐学报,2019,47(9):1222-1234.
ZHAO J, MAO X J, WANG S W. Alumina ceramic foams with controllable cell structure prepared by direct foaming[J]. Journal of the Chinese Ceramic Society, 2019, 47(9): 1222-1234(in Chinese).
[5] ZHANG X Y, HUO W L, CHEN Y G, et al. Novel micro-spherical Si₃N₄ nanowire sponges from carbon-doped silica sol foams via reverse templating method[J]. Journal of the American Ceramic Society, 2018: jace.16167.
[6] 高世涛,余金山,周新贵,等.泡沫碳化硅中碳化硅纳米线的原位生长及结构表征[J].航空制造技术,2014,57(6):126-128.
GAO S T, YU J S, ZHOU X G, et al. In situ growth of SiC nanowires in SiC foam and its microstructure[J]. Aeronautical Manufacturing Technology, 2014, 57(6): 126-128(in Chinese).
[7] ZHU S M, XI H A, LI Q, et al. In situ growth of beta-SiC nanowires in porous SiC ceramics[J]. Journal of the American Ceramic Society, 2005, 88(9): 2619-2621.
[8] REN B, WANG Y L, LIU J J, et al. Preparation of Al₂O₃-Si₃N₄ porous ceramics with a cactus-like architecture for potential filters applications[J]. Ceramics International, 2019, 45(5): 6581-6584.
[9] 范炳玉.SiC一维纳米材料的生产工艺及生长机理研究[D].青岛:青岛科技大学,2012.
FAN B Y. Production process and growth mechanism of SiC one-dimensional nanomaterials[D]. Qingdao: Qingdao University of Science & Technology, 2012(in Chinese).
[10] HUO W L, ZHANG X Y, GAN K, et al. Ceramic particle-stabilized foams/emulsions with UV light response and further synthesis of ceramic capsules[J]. Chemical Engineering Journal, 2019, 360: 1459-1467.
[11] 梁英教,车荫昌.无机物热力学数据手册[M].沈阳:东北大学出版社,1993:83-400.
LIANG Y J, CHE M C. Data Manual of Inorganic Thermodynamics[M]. Shenyang: Northeastern University Press,1993: 83-400(in Chinese).
[12] 李晓鹏.C_sf-SiC_NW/Al复合材料制备及性能研究[D].哈尔滨:哈尔滨工业大学,2014.
LI X P. Study on the preparation and properties of C_sf-SiC_NW/Al composite[D]. Harbin: Harbin Institute of Technology, 2014(in Chinese).
[13] SHIMIZU T, MATSUURA K, FURUE H, et al. Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method[J]. Journal of the European Ceramic Society, 2013, 33(15/16): 3429-3435.
[14] WILSON P, VIJAYAN S, PRABHAKARAN K. Nanowire-decorated SiC foam from tissue paper and silicon powder by filter-pressing[J].The American Ceramic Society, 2020, 17: 519-528.
[15] 殷刘彦.氮化硅基多孔陶瓷及双连续相复合材料的制备与性能研究[D].长沙:国防科学技术大学,2016:61-68.
YIN L Y. Fabrication and performance of silicon nitride related porous ceramics and their co-continous composites[D]. Changsha: National University of Defense Technology, 2016: 61-68(in Chinese).
[16] 王晓波,王峰,贺智勇,等.高导热碳化硅陶瓷的研究进展[J],机械工程材料,2021,9(45):8-12.
WANG X B, WANG F, HE Z Y, et al. Research progress of high thermal conductivity silicon carbide ceramics[J]. Materials for Mechanical Engineering, 2021, 9(45): 8-12(in Chinese).
[17] SAKAI T, AIKAWA T. Phase transformation and thermal conductivity of hot-pressed silicon carbide containing alumina and carbon[J]. Journal of the American Ceramic Society, 1988, 71(1): C-7.
[18] LU Y P, ZANG X R, DU B. Investigation of the effect of the SiC particle size on the properties of the AlN-SiC composite ceramic[J]. Materials Chemistry and Physics, 2021, 261: 124-222.
[19] LEE Y J, PARK Y H, HINOKI T. Influence of grain size on thermal conductivity of SiC ceramics[J]. IOP Conference Series: Materials Science and Engineering, 2011, 18(16): 162-171.
[20] ROMÁN-MANSO B, CHEVILLOTTE Y, OSENDIM I, et al. Thermal conductivity of silicon carbide composites with highly oriented graphene nanoplatelets[J]. Journal of the European Ceramic Society, 2016, 36(16): 3987-3993.
[21] XIA H Y, WANG J P, LIN J P, et al. Thermal conductivity of SiC ceramic fabricated by liquid infiltrating molten Si into mesocarbon microbeads-based preform[J]. Materials Characterization, 2013,82: 1-8.
[22] MEILLE S, LOMBARDI M, CHEVALIER J, et al. Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior[J]. Journal of the European Ceramic Society, 2012(32): 3959-3967.
[23] PRESSER V, SCHULTHEI S,BERTHOLD C,et al. Sea urchin spines as a model-system for permeable, light-weight ceramics with graceful failure behavior. part Ⅰ. Mechanical behavior of sea urchin spines under compression[J]. Journal of Bionic Engineering, 2009, 6: 203-213.