Welcome to JOURNAL OF SYNTHETIC CRYSTALS! Today is Share:

JOURNAL OF SYNTHETIC CRYSTALS ›› 2024, Vol. 53 ›› Issue (11): 1997-2003.

Special Issue: 高功率激光用晶体和透明陶瓷

Previous Articles     Next Articles

Fabrication and Microstructure of Y3+∶CaF2 Transparent Ceramics

LIU Zuodong, PAN Qiyue, LIU Rui, CAO Yue, LI Siya, WANG Jiashun, YU Yongsheng, LIU Peng, JING Qiangshan   

  1. Henan Province Key Laboratory of Utilization of Non-metallic Mineral in the South of Henan, Xinyang Normal University, Xinyang 464000, China
  • Received:2024-09-11 Online:2024-11-15 Published:2024-12-09

Abstract: Y3+∶CaF2 powders were synthesized by chemical coprecipitation method, and transparent ceramics were fabricated by vacuum hot pressing sintering method. Characteristics of the as-synthesized powders were investigated by XRD, SEM and TEM techniques, the relationship between microstructure and transmittance of transparent ceramics were also analyzed. Crystal structures of as-synthesized Y3+∶CaF2 powders belong to single fluorite phase. With the Y3+ doping content increases, the average particles sizes decrease and the lattice constants increase from 5.452 1 Å to 5.465 5 Å. The 5%Y3+∶CaF2 transparent ceramics sintered at 900 ℃ for 3 h exhibits the highest transmittance, and the transmittance at 500 and 1 500 nm are 73.1% and 86.4%, respectively. Microstructure of ceramics are modified by the Y3+ doping content and sintering temperatures. For a low growth velocity, it is not easy to eliminate the residual pores, while for a higher growth velocity, residual pores are easily embedded within grains. Both cases will reduce the transmittance of transparent ceramics. This work provides a reference for the preparation of high-quality composite CaF2 transparent ceramics.

Key words: CaF2 transparent ceramics, Y3+ doping, hot pressing sintering, microstructure, transmittance

CLC Number: