欢迎访问《人工晶体学报》官方网站,今天是 2025年7月24日 星期四 分享到:

人工晶体学报 ›› 2017, Vol. 46 ›› Issue (3): 480-485.

• • 上一篇    下一篇

CeO2对CaTiO3陶瓷烧结性能以及微观结构的影响

安迪;罗旭东;谢志鹏;李婷;刘鹏程   

  1. 辽宁科技大学高温材料与镁资源工程学院,鞍山114051;清华大学材料科学与工程系新型陶瓷与精细工艺国家重点实验室,北京 100084;辽宁科技大学高温材料与镁资源工程学院,鞍山,114051;清华大学材料科学与工程系新型陶瓷与精细工艺国家重点实验室,北京,100084;辽宁科技大学高温材料与镁资源工程学院,鞍山114051;江苏中磊节能科技发展有限公司,东台 224213
  • 出版日期:2017-03-15 发布日期:2021-01-20
  • 基金资助:
    国家自然科学基金(51402143);辽宁省自然基金(601009802)

Effect of CeO2 Addition on Sintering Property and Microstructure of CaTiO3 Ceramics

  • Online:2017-03-15 Published:2021-01-20

摘要: 以CaO和TiO2为原料,采用固相反应烧结法合成钛酸钙陶瓷.以CeO2为添加剂,重点研究CeO2掺杂对合成钛酸钙陶瓷烧结性能及微观结构的影响.利用XRD、SEM、EDS等手段对试样的物相组成、显微形貌以及元素分布进行表征.通过X'pert High score Plus软件研究CeO2添加量和煅烧温度对合成钛酸钙的相组成、晶胞参数、缺陷反应的影响.结果表明:随着CeO2加入量的增大,Ce4+与Ti4+及Ce3+与Ca2+之间发生取代,致使钛酸钙的晶体结构发生畸变,晶格常数以及晶胞体积出现了先增大后减小的趋势.CaTiO3结构中取代位置的改变,是造成晶胞体积呈非线性变化趋势的原因.形成的结构缺陷加速了固相烧结反应,钛酸钙晶粒由发育不完全的台阶状转变为规则的多边形.过量的CeO2会抑制晶粒的生长,减小晶粒尺寸.随着煅烧温度的升高,结构中热缺陷浓度增大,促进了钛酸钙的烧结.

关键词: CeO2;CaTiO3陶瓷;固相反应;烧结性能

Abstract: CaTiO3 ceramics were prepared via solid-state reaction method using CaO and TiO2 as main raw materials.The effects of CeO2 additive on the sintering property and microstructure of CeO2-doping ceramic were mainly studied.The crystalline phase composition, microstructure and sintering characteristics of the specimens were investigated by XRD, SEM, EDS and so on.The lattice parameters and cell volume of CaTiO3 were determined and calculated by X'pert High score Plus software.The results show that the lattice parameters and lattice volume of Ce-doping CaTiO3 are affected by the substitution of Ce3+ for Ca2+ and Ce4+ for Ti4+ in the structure of CaTiO3.With increasing the additive, the lattice parameters and lattice volume increase first and then decrease.Structure defect of solid solution accelerated diffusion of ion and promoted synthesis rate of CaTiO3, resulting in the increase of grain size.The shape of crystal grain change from steps' morphology to regular polygons with excessive addition of CeO2, while the average crystal size decrease.Thermal defects caused by higher sintering temperature also promote the solid reaction and sintering of synthetic CaTiO3.

Key words: CaTiO3 ceramics were prepared via solid-state reaction method using CaO and TiO2 as main raw materials.The effects of CeO2 additive on the sintering property and microstructure of CeO2-doping ceramic were mainly studied.The crystalline phase composition, microstructure and sintering characteristics of the specimens were investigated by XRD, SEM, EDS and so on.The lattice parameters and cell volume of CaTiO3 were determined and calculated by X'pert High score Plus software.The results show that the lattice parameters and lattice volume of Ce-doping CaTiO3 are affected by the substitution of Ce3+ for Ca2+ and Ce4+ for Ti4+ in the structure of CaTiO3.With increasing the additive, the lattice parameters and lattice volume increase first and then decrease.Structure defect of solid solution accelerated diffusion of ion and promoted synthesis rate of CaTiO3, resulting in the increase of grain size.The shape of crystal grain change from steps' morphology to regular polygons with excessive addition of CeO2, while the average crystal size decrease.Thermal defects caused by higher sintering temperature also promote the solid reaction and sintering of synthetic CaTiO3.

中图分类号: